Cockpit, deck, and deck planking (and 1:15 model!)

Cockpit

Clean up and radius cleating. Fit and fibreglass floor panels. Make starboard deck support cleat. Make underfloor framing. Fill and sand coaming insides. Make and fit support ribs and knees. Fit cockpit. Trim back aft deck. Fair keel plug and refill.

Deck

Fair temporary deck beams. Dry fit short deckbeams and fore and aft beams. Fit beams to coaming.

Deck planking

Spile, dry fit, mark, trim and remove first layer. Cut in coves and arrises. Remove small deck beams. Everdure, prime, undercoat, and topcoat all. Sand and re-topcoat. Glue in all small beams. Grind and prepare all decking. Glue in and fair small deckbeams. Glue down first layer decking. Tom as required, spile second layer decking, and glue on. Rip and scarf third layer decking. Begin fairing second layer decking.

Bruce Askew’s 1:15 model

IMGP0432 IMGP0433 IMGP0434 IMGP0435 IMGP0436 IMGP0437 IMGP0438 IMGP0439 IMGP0440 IMGP0441 IMGP0442 IMGP0443 IMGP0444 IMGP0445 IMGP0446 IMGP0447 IMGP0448 IMGP0449 IMGP0450 IMGP0451 IMGP0452 IMGP0453 IMGP0454 IMGP0455 IMGP0456 OLYMPUS DIGITAL CAMERA